Probador de penetración automático
Marca KN
El origen de los productos Dalián, China
El tiempo de entrega entregar tan pronto como se reciba el pago
La capacidad de oferta 30 juegos un mes
El probador de penetración automático se utiliza no solo para evaluar la consistencia de grasas lubricantes y ceras, sino también para evaluar la penetración de la aguja en productos bituminosos.
KN-217Z Automatic Penetration Tester
Overview
KN-217Z Automatic Penetration Tester is used for not only evaluating the consistency of lubricating greases and wax ,but also evaluate the needle penetration for bitumen products.
Features
The instrument automatically detects the cone penetration, and use laser transmission for non-contact detection, which greatly reduces human interference.
6-inch color LCD touch screen, automatic detection and storage of test results.
Electric lifting system, which can adjust the lifting speed electronically.
Base adjustment mechanism: The base is equipped with fine-adjusting anchor screws, and the surface is inlaid with leveling round blisters. The level of the base table can be easily adjusted by adjusting the anchor screw.
Adopt DC low voltage locking device, safe and reliable.
The instrument has a wide measuring range, which can measure the penetration (full size, 1/2, 1/4), as well as the penetration of asphalt and paraffin wax(ASTM D5,ASTM D1321).
Applicable standard
ASTM D217
ASTM D1321
ASTM D5
ASTM D1403
Technical parameters (the following parameters all can conform to ASTM D217 standard)
Measuring range: 0～500 cone penetration unit
Vertebral body release stroke: over 62mm
Laser sensor: Japanese Panasonic laser component system
Minimum reading: 1 cone penetration unit
Timing range: 5 seconds-90 seconds adjustable
Timing error: ≤0.02 seconds
Repeatability: <2+0.03P, P is the arithmetic mean of the two measurement results
Stability: Δu≤0.2
Temperature control range: 23 degrees Celsius-60 degrees Celsius
Power supply: AC220V±10%, 50Hz±2%
Packing List
No. | Item | Unit | Qty. | Remark |
1 | Main host | Set | 1 | Standard equipped |
2 | Full size worker | Set | 1 | Standard equipped |
3 | Full cone | Piece | 1 | Standard equipped |
4 | Cone rod | Piece | 1 | Standard equipped |
5 | Scraper | Piece | 1 | Standard equipped |
6 | 1/2 worker | Piece | 1 | Optional |
7 | 1/2 Cone | Piece | 1 | Optional |
8 | 1/4 worker | Piece | 1 | Optional |
9 | 1/4 Cone | Piece | 1 | Optional |
10 | Dedicated constant temperature bath（25℃±0.1℃） | Set | 1 | Optional |
